# ROOFTOP_PV_FCST_P5_PRED

> Contains forecast predictions for rooftop PV areas, with a 5-minute resolution over the hour-ahead DS/P5MIN timeframe. This is the child table of the parent table [`ROOFTOP_PV_FCST_P5_RUN`](./ROOFTOP_PV_FCST_P5_RUN.md), which contains the corresponding forecast runs.

## Column Schema

### AREAID

> Area identifier, aligning with the load forecasting areas.

SQL Type: `VARCHAR2(10)`
Polars Type: `str`

This column is mandatory, and a primary key.

### FORECAST_PRIORITY

> Priority of forecast run, higher number is used in preference to lower number for the same provider.

SQL Type: `NUMBER(10,0)`
Polars Type: `pl.Int64`

This column is mandatory, and a primary key.

### FORECAST_RUN_DATETIME

> Datetime (interval ending) when this forecast run is valid. It aligns with run_datetime in downstream processes, unless a forecast run is missed in which case the previous run is used.

SQL Type: `DATE`
Polars Type: `pl.Datetime()`

This column is mandatory, and a primary key.

Example: `2026/01/20 00:05:00`

### FORECAST_TYPE

> Type of forecast, for example, POE_10, POE_50, POE_90, MEAN and so on.

SQL Type: `VARCHAR2(20)`
Polars Type: `pl.Categorical`

This column is mandatory, and a primary key.

### INTERVAL_DATETIME

> Datetime (interval-ending) for the period that this forecast applies to, within the current forecast_run_datetime.

SQL Type: `DATE`
Polars Type: `pl.Datetime()`

This column is mandatory, and a primary key.

Example: `2026/01/20 00:05:00`

### OFFERDATETIME

> Datetime when this forecast submission was loaded.

SQL Type: `DATE`
Polars Type: `pl.Datetime()`

This column is mandatory, and a primary key.

Example: `2026/01/20 00:05:00`

### PROVIDERID

> Forecast provider identifier, for example, AEMO, PROVIDER_A and so on.

SQL Type: `VARCHAR2(20)`
Polars Type: `pl.Categorical`

This column is mandatory, and a primary key.

### FORECAST_VALUE

> Forecast value in MW.

SQL Type: `NUMBER(18,8)`
Polars Type: `pl.Float64`

This column is not mandatory.

## New Data Timing

> Every 5 minutes when a new rooftop PV forecast is available, covering the 2 hours ahead horizon with 5-minute resolution

## Code Examples

### Polars

Explicitly listing every column, casting to enums, categoricals etc is not essential, but may speed up parsing.
Swapping `int` for `pl.UInt16`, `pl.Int32` would also speed up parsing. However some of the datatypes are inferred, so they may be wrong.

This code deduplicates for you.
Deduplication is normally only required across multiple months.

This code assumes that all columns are present, which may not be true for older files.

```python
import polars as pl
import polars.selectors as cs

# e.g. "2029/03/15 00:05:00"
dt_s_fmt = "%Y/%m/%d %H:%M:%S"

csv_paths = ["SOMEFILE.CSV", "OTHERFILE.CSV"]

lf = (
    pl.concat(
        [
            pl.scan_csv(
                csv_path,  # must be unzipped beforehand
                skip_rows=1,  # skip the header
                infer_schema=False,  # much faster
            )
            .filter(cs.by_index(0) == "D")  # drop the footer
            .select(~cs.by_index(range(4)))  # drop metadata columns
            for csv_path in csv_paths
        ],
        how="diagonal_relaxed",
    )
    .with_columns(
        pl.col(
            "FORECAST_RUN_DATETIME", "INTERVAL_DATETIME", "OFFERDATETIME"
        ).str.strptime(pl.Datetime, dt_s_fmt),
    )
    .cast(
        {
            "AREAID": str,
            "FORECAST_PRIORITY": int,  # or pl.Int64
            "FORECAST_TYPE": pl.Categorical,
            "PROVIDERID": pl.Categorical,
            "FORECAST_VALUE": pl.Float64,
        }
    )
    # Deduplicate
    # We want one row per ['AREAID', 'FORECAST_PRIORITY', 'FORECAST_RUN_DATETIME', 'FORECAST_TYPE', 'INTERVAL_DATETIME', 'OFFERDATETIME', 'PROVIDERID']
    .unique(
        subset=[
            "AREAID",
            "FORECAST_PRIORITY",
            "FORECAST_RUN_DATETIME",
            "FORECAST_TYPE",
            "INTERVAL_DATETIME",
            "OFFERDATETIME",
            "PROVIDERID",
        ],
        keep="any",
    )
)

```

### Nemosis

This table is not yet available in [Nemosis](https://github.com/UNSW-CEEM/NEMOSIS/#static_table).

## Availability

AEMO's documentation states that this table's visibility is "Public".
However, it is not available in the public monthly [MMSDM archive](https://www.nemweb.com.au/Data_Archive/Wholesale_Electricity/MMSDM/).
AEMO probably call this public because it is available to all market participants over private FTP.

There is a chance that is is still public to non-participants.
It may only be available for some months; or (rarely) it may be available in a non-standard location.

## Deduplication and PDR Loader Configuration

The primary keys are:

- [`AREAID`](#areaid)

- [`FORECAST_PRIORITY`](#forecast_priority)

- [`FORECAST_RUN_DATETIME`](#forecast_run_datetime)

- [`FORECAST_TYPE`](#forecast_type)

- [`INTERVAL_DATETIME`](#interval_datetime)

- [`OFFERDATETIME`](#offerdatetime)

- [`PROVIDERID`](#providerid)

The transaction type is ["insert"](https://di-help.docs.public.aemo.com.au/Content/pdrLoader/How_it_works.htm?TocPath=pdrLoader%7CAbout+pdrLoader%7C_____5#INSERT), which means that you will usually not see duplicate data.
If you do, you can deduplicate based on the primary keys, without sorting first.
Rows from different files with the same primary keys should have the same values.

[PDR Loader configuration](https://nemweb.com.au/Reports/Current/MMSDataModelReport/PDRCONFIG/PROD_PUBLIC_PDR_CONFIG_FULL.zip) is:

| Report Name | Report Subtype | Version |
|---------------|-------------------|-----------|
| DEMAND | ROOFTOP_PV_FCST_P5_PRED  | 1 |

This means that the CSV files start with metadata columns:

```csv
I,DEMAND,ROOFTOP_PV_FCST_P5_PRED,1,...
D,DEMAND,ROOFTOP_PV_FCST_P5_PRED,1,...
```

## Links

[This page as JSON](../json/tables/ROOFTOP_PV_FCST_P5_PRED/bespoke.json) (schema documented [here](https://gitlab.com/MatthewDavis/mms-schema/-/blob/master/schema.py?ref_type=heads), but may change)

Download a [JSON Schema](../json/tables/ROOFTOP_PV_FCST_P5_PRED/json-schema.json) specification for this table.

[Official AEMO schema documentation](https://nemweb.com.au/Reports/Current/MMSDataModelReport/Electricity/ElectricityDataModelReport_files/Elec18.htm#159)

## Other Information

Package: [DEMAND_FORECASTS](../packages/DEMAND_FORECASTS.md)
