# STPASA_FNM_ZONESOLUTION

> STPASA_FNM_ZONESOLUTION shows zone demand, cleared value of resources, spare capacity, losses for each run type and interval.

## Column Schema

### INTERVAL_DATETIME

> End date time of the interval

SQL Type: `DATE`
Polars Type: `pl.Datetime()`

This column is mandatory, and a primary key.

Example: `2026/01/20 00:05:00`

### RUN_DATETIME

> Unique Timestamp Identifier for this run, identified by the first half hour ended interval of the run

SQL Type: `DATE`
Polars Type: `pl.Datetime()`

This column is mandatory, and a primary key.

Example: `2026/01/20 00:05:00`

### RUNTYPE

> Run Type (BASE, RELIABILITY, WARNING)

The SQL type is `VARCHAR2(20)`.
This is actually a factor/enum, with values:

- `BASE`

- `RELIABILITY`

- `WARNING`

This column is mandatory, and a primary key.

### ZONEID

> Zone identifier

SQL Type: `VARCHAR2(30)`
Polars Type: `pl.Categorical`

This column is mandatory, and a primary key.

### BDU_CLEARED

> Cleared Generation (positive) or Consumption (negative) from bidirectional units (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### CLEAREDDEMAND

> Cleared Demand (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### CLEAREDLOSSES

> Cleared Grid Losses (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### CLEAREDNETINTERCHANGE

> Cleared Net Export (positive) or Net Import (negative) (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### CLEAREDSUPPLY

> Cleared Generation (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### DEFICITCONDITION

> Deficit Condition (DEFICITCONDITION) > 0 if a supply deficit exists and this Zone does not contain the Regional Reference Node.
DEFICITCONDITION = 3 if deficit in BASE run
DEFICITCONDITION = 2 if deficit in RELIABILITY run
DEFICITCONDITION = 1 if deficit in WARNING run

SQL Type: `NUMBER(1,0)`
Polars Type: `pl.UInt8`

This column is not mandatory.

### DEMAND_UNCERTAINTY_MARGIN

> Aggregate Uncertainty Margin adjustment (increase) to most probable Demand Forecast (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### ENERGYCONSTRAINED_CLEARED

> Cleared Generation from energy-constrained resources - that is, from bidirectional units and generating units subject to daily energy limits (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### ENERGYUNCONSTRAINED_CLEARED

> Cleared Generation from non energy-constrained resources - that is, excluding bidirectional units and generating units subject to daily energy limits (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### INITIALDEMAND

> Most probable Demand Forecast adjusted by Demand Uncertainty Margin (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### LASTCHANGED

> Date time this record was created

For more information, see the [dedicated documentation page](../../guide/querying.md#deduplication).

SQL Type: `DATE`
Polars Type: `pl.Datetime()`

This column is not mandatory.

Example: `2026/01/20 00:05:00`

### LORCONDITION

> Lack of Reserve Condition (LORCONDITION) > 0 if a supply deficit exists and this Zone contains the Regional Reference Node
LORCONDITION = 3 if deficit in BASE run
LORCONDITION = 2 if deficit in RELIABILITY run
LORCONDITION = 1 if deficit in WARNING run

SQL Type: `NUMBER(1,0)`
Polars Type: `pl.UInt8`

This column is not mandatory.

### REGIONID

> Region identifier of the Region containing this Zone

For more information, see the [dedicated documentation page](../../guide/querying.md#region-id).

The SQL type is `VARCHAR2(20)`.
This is actually a factor/enum, with values:

- `QLD1`

- `VIC1`

- `TAS1`

- `NSW1`

- `SA1`

- `SNOWY1`

This column is not mandatory.

### SCHED_GEN_AUX_LOAD

> Aggregate Auxiliary Load adjustment to uncertainty-adjusted Bid MaxAvail of all scheduled generating units (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### SCHED_GEN_UNCERTAINTY_MARGIN

> Aggregate Uncertainty Margin adjustment (decrease) to Scheduled Generation Bid Max Avail (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### SPARECAPACITY

> Spare generation capacity = max(0, Available Generation minus [Cleared Generation minus Cleared Net Interchange]) (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### SS_CLEARED

> Cleared Generation from semi-scheduled generating units (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### SS_SOLAR_CLEARED

> Cleared Generation from semi-scheduled solar generating units (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### SS_WIND_CLEARED

> Cleared Generation from semi-scheduled wind generating units (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### SUPPLYDEFICIT

> Supply Deficit at loads = Max(0, Initial Demand minus Cleared Demand) where Cleared Demand = (Cleared Generation minus Cleared Losses minus Cleared Net Interchange) (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

### VRE_GEN_UNCERTAINTY_MARGIN

> Aggregate Uncertainty Margin adjustment (decrease) to most probable VRE Forecast (MW)

SQL Type: `NUMBER(12,2)`
Polars Type: `pl.Float64`

This column is not mandatory.

## New Data Timing

> Every 60 minutes

## Code Examples

### Polars

Explicitly listing every column, casting to enums, categoricals etc is not essential, but may speed up parsing.
Swapping `int` for `pl.UInt16`, `pl.Int32` would also speed up parsing. However some of the datatypes are inferred, so they may be wrong.

This code deduplicates for you.
Deduplication is normally only required across multiple months.

This code assumes that all columns are present, which may not be true for older files.

```python
import polars as pl
import polars.selectors as cs

# e.g. "2029/03/15 00:05:00"
dt_s_fmt = "%Y/%m/%d %H:%M:%S"

csv_paths = ["SOMEFILE.CSV", "OTHERFILE.CSV"]

lf = (
    pl.concat(
        [
            pl.scan_csv(
                csv_path,  # must be unzipped beforehand
                skip_rows=1,  # skip the header
                infer_schema=False,  # much faster
            )
            .filter(cs.by_index(0) == "D")  # drop the footer
            .select(~cs.by_index(range(4)))  # drop metadata columns
            for csv_path in csv_paths
        ],
        how="diagonal_relaxed",
    )
    .with_columns(
        pl.col("INTERVAL_DATETIME", "RUN_DATETIME", "LASTCHANGED").str.strptime(
            pl.Datetime, dt_s_fmt
        ),
    )
    .cast(
        {
            "RUNTYPE": pl.Enum(["BASE", "RELIABILITY", "WARNING"]),
            "ZONEID": pl.Categorical,
            "BDU_CLEARED": pl.Float64,
            "CLEAREDDEMAND": pl.Float64,
            "CLEAREDLOSSES": pl.Float64,
            "CLEAREDNETINTERCHANGE": pl.Float64,
            "CLEAREDSUPPLY": pl.Float64,
            "DEFICITCONDITION": int,  # or pl.UInt8
            "DEMAND_UNCERTAINTY_MARGIN": pl.Float64,
            "ENERGYCONSTRAINED_CLEARED": pl.Float64,
            "ENERGYUNCONSTRAINED_CLEARED": pl.Float64,
            "INITIALDEMAND": pl.Float64,
            "LORCONDITION": int,  # or pl.UInt8
            "REGIONID": pl.Enum(["QLD1", "VIC1", "TAS1", "NSW1", "SA1", "SNOWY1"]),
            "SCHED_GEN_AUX_LOAD": pl.Float64,
            "SCHED_GEN_UNCERTAINTY_MARGIN": pl.Float64,
            "SPARECAPACITY": pl.Float64,
            "SS_CLEARED": pl.Float64,
            "SS_SOLAR_CLEARED": pl.Float64,
            "SS_WIND_CLEARED": pl.Float64,
            "SUPPLYDEFICIT": pl.Float64,
            "VRE_GEN_UNCERTAINTY_MARGIN": pl.Float64,
        }
    )
    # Deduplicate
    # We want one row per ['INTERVAL_DATETIME', 'RUN_DATETIME', 'RUNTYPE', 'ZONEID']
    # Tie-breaker: greatest value of LASTCHANGED
    .sort(LASTCHANGED, descending=False)
    .unique(
        subset=["INTERVAL_DATETIME", "RUN_DATETIME", "RUNTYPE", "ZONEID"], keep="last"
    )
)

```

### Nemosis

This table is not yet available in [Nemosis](https://github.com/UNSW-CEEM/NEMOSIS/#static_table).

## Availability

AEMO's documentation states that this table's visibility is "Public".
However, it is not available in the public monthly [MMSDM archive](https://www.nemweb.com.au/Data_Archive/Wholesale_Electricity/MMSDM/).
AEMO probably call this public because it is available to all market participants over private FTP.

There is a chance that is is still public to non-participants.
It may only be available for some months; or (rarely) it may be available in a non-standard location.

## Deduplication and PDR Loader Configuration

The primary keys are:

- [`INTERVAL_DATETIME`](#interval_datetime)

- [`RUN_DATETIME`](#run_datetime)

- [`RUNTYPE`](#runtype)

- [`ZONEID`](#zoneid)

The transaction type is ["insert"](https://di-help.docs.public.aemo.com.au/Content/pdrLoader/How_it_works.htm?TocPath=pdrLoader%7CAbout+pdrLoader%7C_____5#INSERT), which means that you will usually not see duplicate data.
If you do, you can deduplicate based on the primary keys, without sorting first.
Rows from different files with the same primary keys should have the same values.

[PDR Loader configuration](https://nemweb.com.au/Reports/Current/MMSDataModelReport/PDRCONFIG/PROD_PUBLIC_PDR_CONFIG_FULL.zip) is:

| Report Name | Report Subtype | Version |
|---------------|-------------------|-----------|
| STPASA | FNM_ZONESOLUTION  | 1 |

This means that the CSV files start with metadata columns:

```csv
I,STPASA,FNM_ZONESOLUTION,1,...
D,STPASA,FNM_ZONESOLUTION,1,...
```

## Links

[This page as JSON](../json/tables/STPASA_FNM_ZONESOLUTION/bespoke.json) (schema documented [here](https://gitlab.com/MatthewDavis/mms-schema/-/blob/master/schema.py?ref_type=heads), but may change)

Download a [JSON Schema](../json/tables/STPASA_FNM_ZONESOLUTION/json-schema.json) specification for this table.

[Official AEMO schema documentation](https://nemweb.com.au/Reports/Current/MMSDataModelReport/Electricity/ElectricityDataModelReport_files/Elec59.htm#67)

## Other Information

Package: [STPASA_SOLUTION](../packages/STPASA_SOLUTION.md)
